What is important to know the manufacturer.
In March of this year,amendments to the Decree No.982 of theGovernment of the Russian Federation came into force,approving asingle register of objects,the assurance procedure of whichis carried out through mandatory certification.A sufficiently largenumber of commodity units are excluded from the list,adopted adifferent edition,and some types of products invariably continue tofall under the aforementioned law.For example,in the list ofproducts marked by the all-Russian classifier with code2248-Details of thermoplastics,pipes;pressure pipes,polyethylenepipes for gas pipelines.Under code 6981-special,pipe fittings,itscomponent parts.
In Russia,certification of pipes is often a prere fortheir release,legal circulation.Products that are used in thecommunal-household,construction,industry,etc.,depending on thecommodity nomenclature(HS CODE)can be attributed to both themandatory GOST R certification scheme and the procedure forevaluating voluntary documentary confirmation.At the sametime,depending on the choice of the scheme according to thecodes,it is determined what kind of confirmation documentfor this product should be obtained.For example,a certificate forpipes,a certificate for valves,certificate of stateregistration.
All products,in accordance with the current regulatory frameworklisted in the Unified List,are rigorous to perform mandatorycertification,which involves expert assessments of andsafety,as well as a number of necessary tests.Depending on whattype of product passes the obligatory stage of obtainingpermits,the vehicle registration certificate,fire safety documentor test report can be required components.
The paperwork for a steel pipe is possible for a singleproduct(single ),batch or serial production.Applicants fora document can be a manufacturer,service provider.
Steel pipes,as well as fittings,are used in various fields-inindustrial production,in everyday life.They are almostindispensable when carrying out such technological processes as thesupply of water or gas.But,regardless of what sphere they will beused in,their must be confirmed by a certificate ofcertification of pipes,valves,as a result of a certificate ofconformity for valves or a certificate for pipes.
In order to issue and receive a certificate for a pipe or acertificate for valves in Our Center,it is necessary to submit aspecific set of documentation that you can specify on an individualbasis.By basic re,these are:
•technical specifications;
•description and scope;
•if necessary,product samples;
•the relevant TC TR product codes;
•certificate(copy)of compliance with the QMS;
•manual;
•information on the choice of certification scheme;
•a copy of certificates of OGRN,OKPO,INN/KPP,IP application formor constituent documents of the organization;
•copy of invoice or contract
Obtaining permits as a mandatory procedure only for two types ofpipes-used for the construction of gas pipelines and pressuresystems.Upon receipt of a certificate for the remaining pipes,theirpurpose is taken into account.Certificates for pipes:documentationcertifying product conformity to standards,re,accordingto GOST R,regulatory legal acts,documents,other documents notsubject to mandatory state certification,can also be produced atthe request of the manufacturer or distributor,that is,on avoluntary basis.The certificate for the pipe steel papercarrier,representing the permits approved by the sample.Conformityassessment is necessary so that the consumer is confident that theuse of this product will not harm him and others.
The pipe certificate for potential consumers is indisputableproof of the exceptional of the product.Its receiptguarantees not only high products,but also affects thecompetitiveness of the company in the market.
By production and release of construction fittings the presenceof the allowing document is obligatory.Certification of valvesallows legally,legally accept,use duringconstruction,sell,produce,put into circulation,operation type ofthese products.Upon receipt of permits for pipe fittings,specialstudies are carried out,tests determining the main parameters:
•impact strength,impermeability,throughput;
•resistance to internal stress,temperature extremes;
•Level of plating thickness,plasticity,scrollingability,flexibility;
•aesthetic visual appearance,external surface of theproduct;
Receive a certificate of conformity for valves companies thatcare.
