惠山区材料表面燃烧性能测试 防火等级检测

ASTM E1317材料表面燃烧性能测试

专业提供美标ASTM E1317,ISO 5658-2,IMO Resolution A.653(16),IMO 2010 FTPCode等材料防火性能测试，ASTM E1317-19 表面终饰材易燃性测试方法，

ASTM E1317-19测试标准
ASTM E1317-19 Standard Test Method for Flammability of SurfaceFinishes
ASTM E1317-19 表面终饰材易燃性测试方法。

ASTM E1317 this test method was originally developed to closelyfollow the test procedure of IMO Resolution A.653(16).ISO 5658-2also describes similar test equipment. The test procedure used byIMO for regulation of surface finishes is IMO 2010 FTP Code Part 5,which has replaced IMO Resolution A.653(16).

ASTM E1317表面燃烧性能测试参考标准
ASTM E84 Test Method for Surface Burning Characteristics ofBuilding Materials
ASTM E162 Test Method for Surface Flammability of Materials Using aRadiant Heat Energy Source
ASTM E176 Terminology of Fire Standards
ASTM E286 Method of Test for Surface Flammability of BuildingMaterials Using an 8-ft (2.44-m) Tunnel Furnace
ASTM E648 Test Method for Critical Radiant Flux of Floor-CoveringSystems Using a Radiant Heat Energy Source
ASTM E970 Test Method for Critical Radiant Flux of Exposed AtticFloor Insulation Using a Radiant Heat Energy Source
ASTM E1321 Test Method for Determining Material Ignition and FlameSpread Properties

ASTM E1317防火性能测试方法
横向火焰蔓延测试是样品垂直放置在一个矩形辐射面板上并且额外的气体火焰燃烧器。根据CFE值进行评估，CFE值（临界热辐射量值，用kW/m2表示）。CFE值是样品表面火焰停止传播并熄灭的位置所对应的辐射热量值，CFE值是通过测试大火焰蔓延（mm）,与此相应的辐射热值的曲线。这个测试在一个不燃的校正板上进行。

相关标准参考阅读
EN ISO 5660-1热释放量测试 
EN ISO 5658-2垂直火焰蔓延测试
IMO第5部分表面可燃性测试 
IMO Res.A.653(16) & IMO Res.A.687(17)